Atlas Copco’s innovative new HiLight S2+ Solar-powered light tower scores four zeros!

The new ultra efficient solar powered HiLight S2+ LED light tower from Atlas Copco The new cutting-edge, ultra-efficient HiLight S2+ LED light tower from Atlas Copco uses solar radiation as an energy source to deliver optimum performance and 2 000 m2 light coverage. “The fact that the HiLight S2+ is powered by a renewable energy source, i.e. the sun, not only means zero noise, zero fuel consumption and zero emissions, but also zero use of the planet’s finite resources while operating,” notes David Stanford, Atlas Copco Power Technique’s Business Line Manager, Portable Products. He adds that this HiLight light tower enables users to sustainably comply with noise and carbon emission regulations. Owing to the light tower’s ergonomic and user-friendly design, the unit can be quickly and easily set up for operation. The extendible solar panels are simply pulled out from the pop-up canopy and adjusted to best align with the sun’s position. The S2+ unit’s batteries can also be recharged using solar energy which takes approximately eight hours. Using an external power source, batteries can be recharged in only three hours. “Our highly flexible solar light tower provides autonomous operation of up to eleven hours at 100% operation,” confirms Stanford, “And in the event that energy demand exceeds solar yield, operators have the choice of charging the light tower with any external power grid.” An external control panel and dimming function further increase autonomy efficiency. The purpose of a light tower is of course to provide light to enable workers to continue working after sunset. So, in addition to addressing the efficiency and environmental narratives, the high performance S2+, most importantly, provides excellent visibility, ensuring a bright, safe and productive work environment after sunset or in gloomy conditions. This is thanks to Atlas Copco’s innovative LED technology. The lenses in Atlas Copco’s LED complete light tower range feature a very special optic designed specifically for construction and mining applications. Owing to this innovative, fully directional LED lens design, Atlas Copco engineers have maximised the light coverage while reducing ‘lighting waste’. “The LED’s boast a lifespan of 50 000 hours which delivers further savings in terms of reduced replacement costs and maintenance requirements, with subsequent maximised uptime and productivity as a result,” adds Stanford. The HiLight S2+ also features Atlas Copco’s globally renowned robust build quality and compact size, making it easy to transport the unit between sites as well as moving it around the job site. In addition, the low maintenance light tower seamlessly performs at temperatures ranging from -5°C to +50°C and can operate reliably at high altitude without derating, making it particularly suitable for remote work sites. Stanford sums up: “The dynamic S2+ ticks the efficiency, high performance, visibility, flexibility, and safety boxes. We therefore highly recommend this LED light tower for end users and rental companies operating in the construction, mining and oil & gas space. It is also particularly suited to noise-sensitive applications including events and construction work in urban areas,” he concludes. /ends / Atlas Copco Group Great ideas accelerate innovation. At Atlas Copco we have been turning industrial ideas into business-critical benefits since 1873. By listening to our customers and knowing their needs, we deliver value and innovate with the future in mind. Atlas Copco is based in Stockholm, Sweden with customers in more than 180 countries and about 37 000 employees. Revenues of BSEK 95/9 BEUR in 2018. For more information: www.atlascopcogroup.com Power Technique Great ideas accelerate innovation. At Atlas Copco Power Technique, we turn industrial ideas into leading edge technology in air, power and flow solutions. Our passionate people, expertise and service bring sustainable value to industries everywhere. Portable Air is a division within Atlas Copco’s Power Technique business area. The division designs, manufactures and markets a comprehensive range of mobile and energy-efficient compressors, handheld light-demolition tools and industry focused solutions, such as high-pressure boosters and quality air equipment. The products are used in a wide range of industries including construction, mining, oil and gas, and rental. The divisional headquarters are located in Antwerp, Belgium. Principal product development and manufacturing units are located in Europe, Asia, South America and North America. Power and Flow is a division within Atlas Copco’s Power Technique business area. The division designs, manufactures and markets a comprehensive range of mobile and energy-efficient generators, light towers, and pumps. Along with associated accessories and connectivity solutions. The products are used in a wide range of industries including construction, industrial, mining, dewatering, and rental. The divisional headquarters are located in Zaragoza, Spain. Principal product development and manufacturing units are located in Europe, Asia, South America and North America. Issued by: Laverick Media Communications T: +27(0)79 949 1090 sonia@laverickmedia.co.za / www.laverickmedia.co.za

Comments

Post a Comment

Popular posts from this blog

Mines to gain control of yellow metal assets – aims to reduce fraud

SAMAR announces plans to cover entire life-cycle of all assets MIDRAND, SOUTH AFRICA – 25 May 2017 – The Southern African Movable Asset Register (SAMAR) today announces its plans that will allow mines, contractors, manufacturers, importers, builders, banks, insurers as well as the general public to control title and ownership of all movable assets, including yellow metal and other movable assets used during operations. In Africa, many yellow metal assets are crudely marked and registered to businesses. However, SAMAR creates the most recent reliable record of an asset and yellow metal by updating records in real-time as changes are made by various system participants. This allows businesses to effectively manage and control the financing of assets and yellow metal not on eNaTIS throughout their lifecycle. This greatly reduces fraud, theft, double discounting, or incorrect depiction for value and insurance purposes. Benefits for contractors • The value of movable assets and yello
Read more

Reconditioning of components with Thermal Spray Coatings

Image
The application of Thermal Spray coatings by South Africa’s leading surface coating specialists, Thermaspray, can lead to an enhancement in performance and an extension of service life of expensive engineering parts and industrial components, leading to substantial reductions in downtime and production costs. Engineering components and parts in production processes are subject to degradation through wear, corrosion, oxidation and cavitation. Thermaspray, Managing Director, Dr. Jan Lourens, points out that as all these degradation processes are active on the surface of components, a suitably selected and correctly applied surface coating like Thermal Spray can effectively re-condition production equipment to ‘as new’. “In fact”, adds Dr. Lourens, “very often, through degradation analyses and the selection of a superior coating, a thermal spray coating makes it possible to provide virtually as good as new a component. Most importantly for the end user, this means substantial cost sav
Read more

Epiroc and Elf Drilling – keeping the finger on the mining pulse

Image
Epiroc has once again rocked the local mining space with a landmark sale of the first BenchREMOTE in South Africa to key customer, Elf Drilling. The innovative BenchREMOTE is an advanced monitoring system, which can be linked to up to three SmartROCs and is ideal for removing the operator from the danger area, taking him away from the noise and dust and drilling in hazardous areas near the high wall, thereby contributing to elevated safety levels. Elf Drilling, since its inception three decades ago, has been a frontrunner in drilling, sampling and service for the Northern Cape mining industry. Operating as a complementary team, Faghmi Cader, Eduard and Lizelle Mostert are leading Elf Drilling into the new age of automation drilling. Consisting of a regional office in Kathu, a head office in Kimberly and a workshop in Kuruman and supported by a team of 145 employees, the company boasts extensive experience across South Africa, as well as in Namibia and Angola. Elf Drilling is also a m
Read more